The Top Subaru Car Keys Tricks To Transform Your Life > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

It is possible that you need the key fob to be programmed by an automotive locksmith or subaru key fob upgrade dealer, based on the age of your subaru keys is. This is typically accomplished by connecting a programming machine to the computer in your car.

To program your Subaru begin by unlocking the driver's side door using the door button control and then shut it. You will hear a chime and see the dome lights blink in the instrument panel.

Step 1: Locate your transmitter circuit board

There are a few different ways to program your key fob. It is first necessary to identify the type of key fob that you have. You can do this by inspecting the key fob's shape or by listening to the car for a chime.

Once you have the information, you can begin the process of programming your keyfob from home. You'll require an flathead and a steel key for this. You can open the replacement key for subaru forester fob by twisting it. Then, push the metal key in and release the battery from the small tabs that hold it in place. Replace the battery and put the case back together.

Step 2: Unscrew the Key Fob Case

It is a good idea to change the batteries in key fobs in case they aren't working. However, there are cases where the buttons in the key fob could be broken. If you notice the button's contacts made of metal have become loose Try the process of re-soldering them in order to make them function again.

Make sure that you shut off your ignition and close your doors prior to you begin. You can do this by closing the driver's side door and pressing your door button ten times in rapid sequence. Then you'll hear the instrument panel chime, and the dome light will flash. This indicates that you're ready to proceed.

Step 3: Insert the Key Fob in the Ignition

Many online articles will show you how to program your brand new or replacement subaru key Subaru keyfob at home. But, the majority of them don't provide precise instructions. Reprogramming an electronic lock is best handled by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your Subaru with the engine off and all doors shut. Use the door button to unlock all doors. Open and close the driver's door twice more. Then insert and remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system should chirp to confirm that the settings have been altered.

Step 4: Turn the Ignition On.

It is crucial to note that this method of programming a key fob works if you already have a functioning key. If not then a dealership or auto locksmith will be required to program a new key for your Subaru in Fort Bliss.

Once your key has been programmed you should be able start your car in around five seconds. Start by closing all doors and turning off the engine. Next, get in the driver's seat and open all doors using the door button control. Put the key in the ignition, turn it on to the first position (the electrical systems will come on, but the engine remains off) Then, turn it back to the off position ten times in quick succession.

Step 5: Unlock the Door of the Driver's Door

Subaru offers a variety of high-end cars with key fobs which can lock and unlock doors and start the car and defrost the windows. However, at times, these devices stop working properly.

To fix the issue to resolve the issue, you should call a locksmith or the dealer. This will solve the issue and ensure that your vehicle is secure.

To accomplish this, open the door to the driver's side and close it. Place the key in the ignition and then turn it back to position 1. Then, you can return it to the off position. Do this as quickly as you can ten times. After the tenth time, you should hear an audible chime.

Step 6 Step 6: Press the Lock/Unlock key on the driver's Door

The procedure for replacing a battery in the Subaru remote key fob is simple. First, open the external fob casing. Utilize a flathead tool to pry the interior case open and then remove the batteries that were in there.

After removing the battery and replacing it with the new subaru key fob one. Close the case. Then, sit in the driver's seat, and unlock all the doors with the door button control. Put the key in the ignition and turn the key so that the electric system is switched on, but the engine is off. Repeat this 10 times until you hear a chime on the instrument panel. This puts the system in programming mode.

Step 7: Press the Passenger Door Lock/Unlock button.

For some people, the annoying sound heard when locking or unlocking a Subaru key fob from outside the vehicle may become distracting. In some instances, you can disable the chirp by opening and shutting all doors by double-clicking the lock button on your key fob.

Close all doors including the fuel-filler lid and switch off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime after this is accomplished. The chime indicates that the fuel-filler lid and door lid are locked keys in subaru forester. The setting can be changed to make the doors and lids for the fuel-filler lock automatically without having to press a request switch.

Step 8 Step 8: Enter the 8 Digit Transmitter Number

Keep the first 8-digits in your head. Now, climb into the driver's seat, close the doors and turn the ignition to the first position. After ten turns, the instrument panel will sound once.

The circuit board that controls the transmitter is located within the key fob case. There will be two or three sets of numbers (8-digits) on the circuit board. Take note of the first sequence of numbers, and follow the instructions in this guide to register the code in the system of your vehicle. For older models, this process may require a visit the dealer.